Maintain perfusion* during deep intubation.¹
- 9 circumferential perfusion holes to maintain optimal perfusion* of distal vessel and side branches.1
- Reduce the risk of pressure damping and procedure induced ischemia.1
Reduce the risk of pressure damping and procedure induced ischemia1. FlowGuide has 9 circumferential perfusion holes to maintain blood flow* to distal vessel and side branches. Its 15 cm distal shaft is designed to optimize trans-radial approach.1
Guide extension catheter | |
---|---|
Distal shaft length | 15 cm |
Shaft material | Polyether Block Amide |
Tip | Flexible Radiopaque Atraumatic, 1.3 mm length |
Outer coating | Hydrophilic, distal 12 cm |
Exit markers | 95 cm and 105 cm |
Usable length | 150 cm |
BIOTRONIK/IMDS Portfolio | ||||||||
---|---|---|---|---|---|---|---|---|
Navigate |
Prepare |
Treat |
||||||
FlowGuide |
Recross2 |
Nhancer Rx2 |
Pantera LEO2 |
Pantera Pro2 |
Orsiro Mission2 |
Pantera Lux2 |
Freesolve3 |
PK Papyrus2 |
6F |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
- |
✔(2.5-4.0) |
Other Devices | |||||||
---|---|---|---|---|---|---|---|
IVUS | Single Lumen Microcatheters | Rotablator Burr | IVL | ||||
FlowGuide | Eagle Eye Platinum Family, Refinity ST4 |
ACIST KODAMA3 |
Low Profile OD Microcatheters (<3F)5 |
Large Profile OD Microcatheters (Twin-Pass 3.4F)5 |
1.25 mm6 & 1.5 mm6 |
Shockwave C27 |
Shockwave C2+8 |
6F | ✔ | - | ✔ | ✔ | - | ✔ | ✔ |
Name | Ordering Number | IMDS article Number | Required guide catheter ID | Inner Diameter | Perfusion Holes |
---|---|---|---|---|---|
FLOWGUIDE | 490395 | FG60F | 6F, ID ≥ 0.070" (1.78 mm) | 0.056" (1.42 mm) | 9 |
GUIDION SHORT | 490394 | GS60F | 6F, ID ≥ 0.070" (1.78 mm) | 0.056" (1.42 mm) | 0 |
Guidion Short = guide extension catheter for CTO PCI which has the same design as FlowGuide, with the exclusion of the perfusion holes and different end-stop color (yellow).
*Optimal perfusion performance dependent on the relative position of the perfusion holes; **Please refer to the Instruction for Use.
1. IMDS data on file.
FlowGuide and Guidion Short are trademarks of IMDS.
Manufactured by IMDS and distributed by BIOTRONIK in selected countries.